TRIMDEK? ZINCALUME? Roofing Sheets View larger

Trimdek® ZINCALUME® Roofing Sheets

TRIMDEK® Zincalume is used on roofs with a minimum of 2 degree of fall or greater.  It is screw down metal deck roofing iron, which makes it very easy to install.

Call us today for the lowest prices with FAST delivery on 5972 0576 or come visit us at 48 Watt Road, Mornington.

Same Day service available. 
 




Prices including GST from:
$10.70

Per Lineal Metre

Call 5972 0576 to order

TRIMDEK® Zincalume

Also known as Trimclad and Monoclad



TRIMDEK® is used on roofs with a minimum of 2 degree of fall or greater.  It is screw down metal deck roofing iron, which makes it very easy to install. These roofing sheets are a cost effective alternative to Klip-Lok roofing sheets. It sits well in both domestic and commercial applications.



TRIMDEK® is a subtle square-fluted steel cladding, available in long lengths, so on most jobs you can have one sheet from ridge to gutter without end laps. in addition, it is made of high strength steel and despite its lightness, provides excellent spanning capacity and remarkable recovery after deformation.


The strength, spanning ability, lightness and rigidity of TRIMDEK® permits wide support spacings to be used with safety.


Cover of sheet - 762mm (same cover as corrugated iron). The "cover of sheet" is the measured amount each sheet will cover (including the side lap) when layed in position on the roof.








Related Products